• Advertisement

Sand Etching Hose Hardware

This is for discussion of all topics of interest to our members.
  • Advertisement

Sand Etching Hose Hardware

Postby BobH » July 21st, 2015, 10:29 am

Besides Rayzist and Ikonics has anyone found a good source of brass hose (NPT) hardware such as a nozzle holder, bushings, extenders, etc? My sources are very hit or miss. I generally use Interstate and Western Enterprises parts but am open to any manufacturer.
BobH
 
Posts: 20
Joined: July 13th, 2015, 12:43 pm
Location: Murrieta, CA

Re: Sand Etching Hose Hardware

Postby Rich » July 21st, 2015, 10:37 am

Lots of people find these parts at a good hardware store. In addition you can find seals and whatnot from specialty places. I recently found wonderful cone shaped hard plastic washers that fit my nozzle perfectly at a homebrew shop (sold for soda equipment serving). This topic has been covered numerous times and there are lots of good ideas around it. Best.
User avatar
Rich
 
Posts: 682
Joined: June 6th, 2010, 12:35 pm
Location: Portland Oregon

Re: Sand Etching Hose Hardware

Postby BobH » July 21st, 2015, 5:18 pm

Thanks Rich, we have lots of homebrew shops.
BobH
 
Posts: 20
Joined: July 13th, 2015, 12:43 pm
Location: Murrieta, CA

Re: Sand Etching Hose Hardware

Postby Charles » July 21st, 2015, 5:20 pm

Bicknell Supply
Miles Supply
Charles Mckenzie
McKenzie Monuments Inc.
3450 N. St. Louis St.
Batesville, AR 72501
870-793-3216
User avatar
Charles
Moderator
 
Posts: 3132
Joined: June 7th, 2010, 6:55 am
Location: Batesville, AR

Re: Sand Etching Hose Hardware

Postby David Takes » July 21st, 2015, 6:08 pm

David Takes
Expressions Engraved
St. Joseph, Missouri
http://www.expressionsengraved.com
User avatar
David Takes
 
Posts: 847
Joined: July 3rd, 2010, 12:42 pm
Location: St. Joseph, Missouri

Re: Sand Etching Hose Hardware

Postby Rich » July 21st, 2015, 9:33 pm

Oh that is a good one, David. I forgot about it.
User avatar
Rich
 
Posts: 682
Joined: June 6th, 2010, 12:35 pm
Location: Portland Oregon

Re: Sand Etching Hose Hardware

Postby BobH » July 27th, 2015, 3:19 pm

Thanks everyone, just what I was looking for!
BobH
 
Posts: 20
Joined: July 13th, 2015, 12:43 pm
Location: Murrieta, CA


Return to Can we Talk !

Who is online

Users browsing this forum: No registered users and 5 guests

  • Advertisement